Price - £195.00 + VAT
RE289, as of 2023, the latest in cam development from Russell Engineering specifically designed for the small-bore engine range. Designed to produce strong performance between 2000 and 6000rpm. Works very well in most engine build specs, but requires a decent cylinder head to get the best from it. As a minimum, a standard head with a big valve conversion applied. That is a 1.218" inlet valve with critical and specific multi-angle valve seat as per CST2006.
Recommended compression ratio is 9.5:1 to 10.0:1
To avoid premature wear, I very strongly advise, to the point of insistence, that you use the cam followers sold on this site (CST3024 standard type, CST3025 race type) as they have had the face re-profiled to give them the essential correct shape absent from the vast majority of followers on the market.
Never use used cam followers unless it is on the cam they came from and where position numbered.
All cams have A+-type slot drive for oil pump.Now ground on brand new cross-drilled cam blanks.
Comes with cam lube and installation instructions.
